 |
2011.05.14 - Soundboard cut out & thicknessed & rosette installed |
| 2011.05.14 - Sound hole reinforced |
 |
 |
2011.05.14 - Back cut out & thicknessed |
| 2011.05.17 - Soundboard bracing |
 |
 |
2011.05.19 - Back bracing complete |
| 2011.05.19 - Front & back complete |
 |
 |
2011.05.20 - Neck blank marked |
| 2011.05.20 - Neck rough cut |
 |
 |
2011.05.27 - Ribs bent & trimmed with neck block & end block glued in |
| 2011.05.27 - Kerfed linings for soundboard glued in |
 |
 |
2011.05.27 - Neck trimmed up with truss rod installed |
| 2011.05.29 - Ribs ready for the soundboard |
 |
 |
2011.05.30 - Butt joint strip installed |
| 2011.05.31 - Mechanical neck joint rough fit |
 |
 |
2011.06.10 - Soundboard mated with ribs, back linings glued in |
| 2011.06.12 - Ready to mate back to body |
 |
 |
2011.06.16 - Back mated to body |
| 2011.06.19 - Body mostly complete |
 |
 |
2011.06.24 - Bindings glued on |
| 2011.06.25 - Body cleaned up & complete |
 |
 |
2011.06.30 - Neck with fingerboard glued on & fret wires mostly installed |
| 2011.06.30 - Mating the neck to the body |
 |
 |
2011.07.03 - Construction complete |
| 2011.07.09 - Taped up ready for lacquering |
 |
 |
2011.07.17 - Mother-of-pearl logo installed |
| 2011.07.18 - Final setup |
 |
 |
2011.07.18 - Done & strung ! |
